Stationary Waste Compactor features simple installation, efficient processing, and environmental protection. It can meet the unloading requirements of various garbage collection methods such as manual carts, three-wheel vehicles, dump trucks, and small garbage compressors. It can be configured with multiple modes including mobile rear loading, moving machine side loading, moving box rear loading, and moving box top loading. The single machine processing capacity can reach over 100 tons. The Stationary Waste Compactor is suitable for handling concentrated urban domestic garbage, especially meeting the requirements of strong peak handling capacity.
Product Type
Product Advantage
European advanced technology ensures reliable equipment operation and efficient work; the hydraulic power unit has a modular design built-in, with advanced system performance, neat pipeline arrangement, and a smooth and beautiful appearance;
The key materials of the compressor adopt internationally leading high-strength, wear-resistant, and corrosion-resistant steel plates, suitable for specific high-corrosive working environments, ensuring long equipment service life;
The design without guide rails, with a small gap between the compression head and the surrounding of the machine box, ensures that the push head runs smoothly during the back-and-forth process of compressing garbage, reduces the wear between the push head and the machine box, and does not bring garbage into the rear part of the compression chamber, reducing the workload of equipment cleaning and maintenance;
The stroke of the compression head pushing into the box is long, ensuring that the gate mechanism descends faster than the rebound of the garbage, and when the garbage bin is full, it can perform powerful compression to ensure that there is no garbage left hanging after the gate is closed;
The hydraulic system has a high working pressure, strong garbage crushing ability, and large compression force;
The compression cycle time is short, the compression chamber volume is large, the garbage treatment efficiency is high, and it has strong garbage processing capacity during peak periods;
The intelligent operation and control system uses a microprocessor for control, enabling automatic box replacement, locking, and automatic compression cycle, with full-load warning, emergency stop, strong return, and safety warning functions;
The equipment adopts advanced European technology, does not require ground pre-burial treatment, and is installed quickly and efficiently.
Run process
The garbage truck brings the collected garbage to the station and dumps it onto the loading platform into the compressor's discharge port. The hydraulic cylinder compresses the garbage in the delivery bin, repeatedly loading, compressing, and pressing the garbage into the bin until it is full. The bin gate closes: After pushing the shovel into the bin, it moves back a certain distance past the gate. The compressor's door lifting mechanism activates to close the gate, and the shovel continues to move back into place. The transfer bin disengages: The hydraulic cylinder releases the bin, and the push-pull mechanism pushes the garbage away from the compressor's docking port, completing the bin disengagement. The displacement platform then moves horizontally again, moving the full bin to another location. Simultaneously, it also moves the empty bin, which was previously placed on the displacement platform, into the compression position. The hook truck removes the garbage transfer bin. The hook truck picks up the full bin and pulls it onto the transfer truck's frame. The locking device secures the bin, and the vehicle departs the compression station.
Product Parameters
Performance Parameters | |
Equipment Model | ZYG-15/17/20 |
Compacted Density (t/㎡) | ≥0.75 |
Motor Power (kW) | 11/15/22 |
Hydraulic System Set Pressure (MPa) | 16~20 |
Case Volume (㎡) | 15/17/20 |
Power Supply (V) | 380v, 3-phase, 50HZ |
Our advantage
1.Reasonable Design
The compression head is located above the tank to prevent backflow and protect the cylinder and compression head from corrosion caused by wastewater, thus ensuring the tank remains clean. The wastewater collection tank is equipped with a leak-proof device to prevent wastewater leakage. Wastewater can be discharged directly via a wastewater pump or transported along with the tank for disposal.
2. Small Footprint
This compactor has a small footprint, is highly maneuverable, and can be adapted to various work locations.
3. Multiple Inlet Options
A variety of waste delivery options are available, including hoppers and tilting drums. Customers can choose the most suitable delivery method based on their needs.
4. Outstanding Performance
The system utilizes high-strength steel for its main frame, ensuring a long service life. It also features a high compression ratio and short cycle times, ensuring efficient operation.
5. Standardization
This waste compactor is compatible with most standard hook-type garbage trucks worldwide.
6. Customization
As a professional manufacturer, we can fully meet customer needs, including color, capacity, size, voltage, and more.
Product Uses
Garbage transfer station: As the core equipment, it centrally compresses the garbage collected at the front end to reduce the number of transfer vehicles.
Industrial field: Processing production waste (such as automobile dismantling waste, packaging waste) to reduce storage and transportation costs.
Construction site: Compressing construction waste (concrete blocks, waste wood) to reduce on-site stacking and transportation costs.
Garden/agricultural scene: Compressing biomass waste such as pruned branches and crop straw for subsequent composting or energy utilization.
Productive Capacity
We have a professional team and the strength of the factory to support customization. Including type, volume, height, color and other requirements, free custom logo.
Packaging and shipping
The shipping methods include: Ro-Ro, bulk shipping, 20ft container, 40ft container, 40 HQ container, flat rack container, open top, platform container express, etc.
We are a professional manufacturer of sanitation machinery, providing customers with ex-factory prices and on-demand customization services. You can contact us via WhatsApp or email.
Stationary Waste Compactor features simple installation, efficient processing, and environmental protection. It can meet the unloading requirements of various garbage collection methods such as manual carts, three-wheel vehicles, dump trucks, and small garbage compressors. It can be configured with multiple modes including mobile rear loading, moving machine side loading, moving box rear loading, and moving box top loading. The single machine processing capacity can reach over 100 tons. The Stationary Waste Compactor is suitable for handling concentrated urban domestic garbage, especially meeting the requirements of strong peak handling capacity.
Product Type
Product Advantage
European advanced technology ensures reliable equipment operation and efficient work; the hydraulic power unit has a modular design built-in, with advanced system performance, neat pipeline arrangement, and a smooth and beautiful appearance;
The key materials of the compressor adopt internationally leading high-strength, wear-resistant, and corrosion-resistant steel plates, suitable for specific high-corrosive working environments, ensuring long equipment service life;
The design without guide rails, with a small gap between the compression head and the surrounding of the machine box, ensures that the push head runs smoothly during the back-and-forth process of compressing garbage, reduces the wear between the push head and the machine box, and does not bring garbage into the rear part of the compression chamber, reducing the workload of equipment cleaning and maintenance;
The stroke of the compression head pushing into the box is long, ensuring that the gate mechanism descends faster than the rebound of the garbage, and when the garbage bin is full, it can perform powerful compression to ensure that there is no garbage left hanging after the gate is closed;
The hydraulic system has a high working pressure, strong garbage crushing ability, and large compression force;
The compression cycle time is short, the compression chamber volume is large, the garbage treatment efficiency is high, and it has strong garbage processing capacity during peak periods;
The intelligent operation and control system uses a microprocessor for control, enabling automatic box replacement, locking, and automatic compression cycle, with full-load warning, emergency stop, strong return, and safety warning functions;
The equipment adopts advanced European technology, does not require ground pre-burial treatment, and is installed quickly and efficiently.
Run process
The garbage truck brings the collected garbage to the station and dumps it onto the loading platform into the compressor's discharge port. The hydraulic cylinder compresses the garbage in the delivery bin, repeatedly loading, compressing, and pressing the garbage into the bin until it is full. The bin gate closes: After pushing the shovel into the bin, it moves back a certain distance past the gate. The compressor's door lifting mechanism activates to close the gate, and the shovel continues to move back into place. The transfer bin disengages: The hydraulic cylinder releases the bin, and the push-pull mechanism pushes the garbage away from the compressor's docking port, completing the bin disengagement. The displacement platform then moves horizontally again, moving the full bin to another location. Simultaneously, it also moves the empty bin, which was previously placed on the displacement platform, into the compression position. The hook truck removes the garbage transfer bin. The hook truck picks up the full bin and pulls it onto the transfer truck's frame. The locking device secures the bin, and the vehicle departs the compression station.
Product Parameters
Performance Parameters | |
Equipment Model | ZYG-15/17/20 |
Compacted Density (t/㎡) | ≥0.75 |
Motor Power (kW) | 11/15/22 |
Hydraulic System Set Pressure (MPa) | 16~20 |
Case Volume (㎡) | 15/17/20 |
Power Supply (V) | 380v, 3-phase, 50HZ |
Our advantage
1.Reasonable Design
The compression head is located above the tank to prevent backflow and protect the cylinder and compression head from corrosion caused by wastewater, thus ensuring the tank remains clean. The wastewater collection tank is equipped with a leak-proof device to prevent wastewater leakage. Wastewater can be discharged directly via a wastewater pump or transported along with the tank for disposal.
2. Small Footprint
This compactor has a small footprint, is highly maneuverable, and can be adapted to various work locations.
3. Multiple Inlet Options
A variety of waste delivery options are available, including hoppers and tilting drums. Customers can choose the most suitable delivery method based on their needs.
4. Outstanding Performance
The system utilizes high-strength steel for its main frame, ensuring a long service life. It also features a high compression ratio and short cycle times, ensuring efficient operation.
5. Standardization
This waste compactor is compatible with most standard hook-type garbage trucks worldwide.
6. Customization
As a professional manufacturer, we can fully meet customer needs, including color, capacity, size, voltage, and more.
Product Uses
Garbage transfer station: As the core equipment, it centrally compresses the garbage collected at the front end to reduce the number of transfer vehicles.
Industrial field: Processing production waste (such as automobile dismantling waste, packaging waste) to reduce storage and transportation costs.
Construction site: Compressing construction waste (concrete blocks, waste wood) to reduce on-site stacking and transportation costs.
Garden/agricultural scene: Compressing biomass waste such as pruned branches and crop straw for subsequent composting or energy utilization.
Productive Capacity
We have a professional team and the strength of the factory to support customization. Including type, volume, height, color and other requirements, free custom logo.
Packaging and shipping
The shipping methods include: Ro-Ro, bulk shipping, 20ft container, 40ft container, 40 HQ container, flat rack container, open top, platform container express, etc.
We are a professional manufacturer of sanitation machinery, providing customers with ex-factory prices and on-demand customization services. You can contact us via WhatsApp or email.
