Stationary Garbage Compactor offer simple installation, efficient processing, and a closed, environmentally friendly design. They accommodate a variety of waste collection methods, including manual trucks, tricycles, dump trucks, and small compactors. Loading modes include rear loading, side loading, rear loading, and top loading. With a daily processing capacity exceeding 100 tons per unit, each unit is suitable for centralized municipal waste processing, particularly those requiring high peak processing capacity.
Product Type
Product Advantage
Advanced International Technology
Advanced European technology ensures reliable and efficient operation. The hydraulic power unit features a modular design, delivering advanced system performance, neatly arranged piping, and a sleek, aesthetically pleasing appearance.
Long Service Life
The compressor's key materials utilize internationally leading high-strength, wear-resistant, and corrosion-resistant steel plates, suitable for highly corrosive operating environments and ensuring a long service life.
Intelligent Control System
The intelligent operation and control system utilizes a microprocessor, enabling automatic housing rotation, locking, and compression cycles. It also features full-load warning, emergency stop, forced retraction, and safety warning functions.
Quick and Efficient Installation
The equipment utilizes advanced European installation techniques, eliminating the need for pre-embedded groundwork, ensuring fast and efficient installation.
Run process
The garbage truck brings the collected garbage to the station and dumps it onto the loading platform into the compressor's discharge port. The hydraulic cylinder compresses the garbage in the delivery bin, repeatedly loading, compressing, and pressing the garbage into the bin until it is full. The bin gate closes: After pushing the shovel into the bin, it moves back a certain distance past the gate. The compressor's door lifting mechanism activates to close the gate, and the shovel continues to move back into place. The transfer bin disengages: The hydraulic cylinder releases the bin, and the push-pull mechanism pushes the garbage away from the compressor's docking port, completing the bin disengagement. The displacement platform then moves horizontally again, moving the full bin to another location. Simultaneously, it also moves the empty bin, which was previously placed on the displacement platform, into the compression position. The hook truck removes the garbage transfer bin. The hook truck picks up the full bin and pulls it onto the transfer truck's frame. The locking device secures the bin, and the vehicle departs the compression station.
Product Parameters
Performance Parameters | |
Equipment Model | ZYG-15/17/20 |
Compacted Density (t/㎡) | ≥0.75 |
Motor Power (kW) | 11/15/22 |
Hydraulic System Set Pressure (MPa) | 16~20 |
Case Volume (㎡) | 15/17/20 |
Power Supply (V) | 380v, 3-phase, 50HZ |
Our advantage
1.Reasonable Design
The compression head is located above the tank to prevent backflow and protect the cylinder and compression head from corrosion caused by wastewater, thus ensuring the tank remains clean. The wastewater collection tank is equipped with a leak-proof device to prevent wastewater leakage. Wastewater can be discharged directly via a wastewater pump or transported along with the tank for disposal.
2. Small Footprint
This compactor has a small footprint, is highly maneuverable, and can be adapted to various work locations.
3. Multiple Inlet Options
A variety of waste delivery options are available, including hoppers and tilting drums. Customers can choose the most suitable delivery method based on their needs.
4. Outstanding Performance
The system utilizes high-strength steel for its main frame, ensuring a long service life. It also features a high compression ratio and short cycle times, ensuring efficient operation.
5. Standardization
This waste compactor is compatible with most standard hook-type garbage trucks worldwide.
6. Customization
As a professional manufacturer, we can fully meet customer needs, including color, capacity, size, voltage, and more.
Product Uses
Garbage transfer station: As the core equipment, it centrally compresses the garbage collected at the front end to reduce the number of transfer vehicles.
Industrial field: Processing production waste (such as automobile dismantling waste, packaging waste) to reduce storage and transportation costs.
Construction site: Compressing construction waste (concrete blocks, waste wood) to reduce on-site stacking and transportation costs.
Garden/agricultural scene: Compressing biomass waste such as pruned branches and crop straw for subsequent composting or energy utilization.
Productive Capacity
We have a professional team and the strength of the factory to support customization. Including type, volume, height, color and other requirements, free custom logo.
Packaging and shipping
The shipping methods include: Ro-Ro, bulk shipping, 20ft container, 40ft container, 40 HQ container, flat rack container, open top, platform container express, etc.
FAQ
Are you a manufacturer or Trader?
We are a professional manufacture, we have our own R&D team and sales team, we provide one-stop service.
What is your payment term?
We accept T/T, L/C at sight, Western Union, Paypal etc.
How long is the validity of quotation?
Generally, our price is valid within one month from the date of quotation. The price will be adjusted appropriately according to the price fluctuation of raw materials and changes in market.
What is your delivery time?
Usually, we make merchandise inventory. If we have the products in stock, the delivery time is 5-10 days after receiving the deposit. If we don't have the products in stock, we will arrange the production right now, the delivery time will be 10-30 days. It depends on the order quantity.
Do you provide OEM/ODM Service?
Yes, with necessary information, we provide custom-make service to meet different needs of global clients with different budgets.
How can we ensure quality?
The final inspection is always carried out before shipment.
How to install the equipment after purchasing?
We will provide a professional installation video to illustrate, as well as a manual.
Do you offer a guarantee?
Yes, we guarantee our product for one year. After-sales service support and technical support are both available.
What is your MOQ?
1 set.
We are a professional manufacturer of sanitation machinery, providing customers with ex-factory prices and on-demand customization services. You can contact us via WhatsApp or email.
Stationary Garbage Compactor offer simple installation, efficient processing, and a closed, environmentally friendly design. They accommodate a variety of waste collection methods, including manual trucks, tricycles, dump trucks, and small compactors. Loading modes include rear loading, side loading, rear loading, and top loading. With a daily processing capacity exceeding 100 tons per unit, each unit is suitable for centralized municipal waste processing, particularly those requiring high peak processing capacity.
Product Type
Product Advantage
Advanced International Technology
Advanced European technology ensures reliable and efficient operation. The hydraulic power unit features a modular design, delivering advanced system performance, neatly arranged piping, and a sleek, aesthetically pleasing appearance.
Long Service Life
The compressor's key materials utilize internationally leading high-strength, wear-resistant, and corrosion-resistant steel plates, suitable for highly corrosive operating environments and ensuring a long service life.
Intelligent Control System
The intelligent operation and control system utilizes a microprocessor, enabling automatic housing rotation, locking, and compression cycles. It also features full-load warning, emergency stop, forced retraction, and safety warning functions.
Quick and Efficient Installation
The equipment utilizes advanced European installation techniques, eliminating the need for pre-embedded groundwork, ensuring fast and efficient installation.
Run process
The garbage truck brings the collected garbage to the station and dumps it onto the loading platform into the compressor's discharge port. The hydraulic cylinder compresses the garbage in the delivery bin, repeatedly loading, compressing, and pressing the garbage into the bin until it is full. The bin gate closes: After pushing the shovel into the bin, it moves back a certain distance past the gate. The compressor's door lifting mechanism activates to close the gate, and the shovel continues to move back into place. The transfer bin disengages: The hydraulic cylinder releases the bin, and the push-pull mechanism pushes the garbage away from the compressor's docking port, completing the bin disengagement. The displacement platform then moves horizontally again, moving the full bin to another location. Simultaneously, it also moves the empty bin, which was previously placed on the displacement platform, into the compression position. The hook truck removes the garbage transfer bin. The hook truck picks up the full bin and pulls it onto the transfer truck's frame. The locking device secures the bin, and the vehicle departs the compression station.
Product Parameters
Performance Parameters | |
Equipment Model | ZYG-15/17/20 |
Compacted Density (t/㎡) | ≥0.75 |
Motor Power (kW) | 11/15/22 |
Hydraulic System Set Pressure (MPa) | 16~20 |
Case Volume (㎡) | 15/17/20 |
Power Supply (V) | 380v, 3-phase, 50HZ |
Our advantage
1.Reasonable Design
The compression head is located above the tank to prevent backflow and protect the cylinder and compression head from corrosion caused by wastewater, thus ensuring the tank remains clean. The wastewater collection tank is equipped with a leak-proof device to prevent wastewater leakage. Wastewater can be discharged directly via a wastewater pump or transported along with the tank for disposal.
2. Small Footprint
This compactor has a small footprint, is highly maneuverable, and can be adapted to various work locations.
3. Multiple Inlet Options
A variety of waste delivery options are available, including hoppers and tilting drums. Customers can choose the most suitable delivery method based on their needs.
4. Outstanding Performance
The system utilizes high-strength steel for its main frame, ensuring a long service life. It also features a high compression ratio and short cycle times, ensuring efficient operation.
5. Standardization
This waste compactor is compatible with most standard hook-type garbage trucks worldwide.
6. Customization
As a professional manufacturer, we can fully meet customer needs, including color, capacity, size, voltage, and more.
Product Uses
Garbage transfer station: As the core equipment, it centrally compresses the garbage collected at the front end to reduce the number of transfer vehicles.
Industrial field: Processing production waste (such as automobile dismantling waste, packaging waste) to reduce storage and transportation costs.
Construction site: Compressing construction waste (concrete blocks, waste wood) to reduce on-site stacking and transportation costs.
Garden/agricultural scene: Compressing biomass waste such as pruned branches and crop straw for subsequent composting or energy utilization.
Productive Capacity
We have a professional team and the strength of the factory to support customization. Including type, volume, height, color and other requirements, free custom logo.
Packaging and shipping
The shipping methods include: Ro-Ro, bulk shipping, 20ft container, 40ft container, 40 HQ container, flat rack container, open top, platform container express, etc.
FAQ
Are you a manufacturer or Trader?
We are a professional manufacture, we have our own R&D team and sales team, we provide one-stop service.
What is your payment term?
We accept T/T, L/C at sight, Western Union, Paypal etc.
How long is the validity of quotation?
Generally, our price is valid within one month from the date of quotation. The price will be adjusted appropriately according to the price fluctuation of raw materials and changes in market.
What is your delivery time?
Usually, we make merchandise inventory. If we have the products in stock, the delivery time is 5-10 days after receiving the deposit. If we don't have the products in stock, we will arrange the production right now, the delivery time will be 10-30 days. It depends on the order quantity.
Do you provide OEM/ODM Service?
Yes, with necessary information, we provide custom-make service to meet different needs of global clients with different budgets.
How can we ensure quality?
The final inspection is always carried out before shipment.
How to install the equipment after purchasing?
We will provide a professional installation video to illustrate, as well as a manual.
Do you offer a guarantee?
Yes, we guarantee our product for one year. After-sales service support and technical support are both available.
What is your MOQ?
1 set.
We are a professional manufacturer of sanitation machinery, providing customers with ex-factory prices and on-demand customization services. You can contact us via WhatsApp or email.
